🔥 REPLACEMENT GAS OVEN IGNITER
Restore the ignition system of your compatible gas oven with the SIC AR10043 / DS023KX Hot Surface Oven Igniter .
Designed as a replacement for GE WB13K10043 , this glow bar igniter is suitable for select compatible GE, Hotpoint and RCA gas ranges .
The assembly features a ceramic base, metal mounting bracket and approximately 18-1/4-inch lead length , measured from the connector plug tip to the ceramic base.
A practical replacement component for repairing compatible ovens with a properly diagnosed faulty igniter.
⭐ PRODUCT FEATURES
🔥 HOT SURFACE IGNITION
Glow bar ignition element designed to support proper burner ignition in compatible gas ovens.
🔄 GE WB13K10043 REPLACEMENT
Designed to replace GE part number WB13K10043 in compatible appliances.
⚡ 3.2-3.6 AMP CLASS
Hot surface igniter designed for compatible gas oven ignition systems requiring the appropriate electrical specifications.
📏 18-1/4″ LEAD LENGTH
Approximately 18-1/4 inches from the connector plug tip to the ceramic base.
🔩 METAL MOUNTING BRACKET
Metal mounting bracket around the ceramic base for compatible installation configurations. No separate igniter shield.
🛠️ APPLIANCE REPAIR PART
Suitable for compatible oven maintenance and replacement of damaged or defective ignition components.
🔢 REPLACEMENT PART NUMBERS
| AR10043 |
Replacement Model |
| DS023KX |
SIC Reference |
| WB13K10043 |
GE Replacement Reference |
| AP5645233 |
Cross-Reference |
| PS4704151 |
Cross-Reference |
✅ COMPATIBLE APPLIANCE BRANDS
- GE / General Electric — Select Gas Ovens & Ranges
- Hotpoint — Select Compatible Gas Ranges
- RCA — Select Compatible Gas Ovens
Compatibility depends on the exact appliance model and original igniter specifications.
📋 PRODUCT SPECIFICATIONS
| Brand |
SIC / Surface Igniter |
| Model |
AR10043 / DS023KX |
| Product Type |
Gas Oven Igniter / Glow Bar |
| Replaces |
WB13K10043 |
| Lead Length |
Approx. 18-1/4 Inches |
| Mounting |
Metal Bracket / Ceramic Base |
| Shield |
No Separate Shield |
| Compatible Brands |
Select GE / Hotpoint / RCA |
| Condition |
Brand New |
🔧 COMMON IGNITER FAILURE SYMPTOMS
- 🔥 Oven Burner Does Not Ignite
- ⏳ Oven Takes Too Long to Preheat
- 🌡️ Oven Does Not Reach the Selected Temperature
- ⚡ Igniter Glows but Burner Does Not Light
- 🔄 Intermittent Oven Heating
These symptoms may have multiple causes. Proper diagnosis is recommended before replacing the igniter.
⚠️ IMPORTANT — VERIFY FITMENT
Confirm that your appliance requires WB13K10043 or an approved equivalent before ordering.
Compare your original igniter with the listing photos, including the ceramic element, metal mounting bracket, wire length and electrical connector.
The reference WB21K10043 is not confirmed as interchangeable with WB13K10043. Do not assume compatibility based on that number alone.
🛡️ GAS APPLIANCE SAFETY
Disconnect electrical power and shut off the gas supply before servicing the appliance.
The igniter element is fragile and should be handled carefully. Installation must follow the appliance manufacturer’s instructions and applicable safety requirements.
If connector modification is required, use only approved high-temperature components and proper installation procedures.
Professional appliance service installation is recommended.
📦 PACKAGE INCLUDES
🔥 1 × SIC AR10043 / DS023KX Replacement Oven Igniter
For Compatible GE WB13K10043 Applications
Please refer to the listing photos for the exact connector and any additional installation accessories included.
✅ WHY BUY FROM US?
🚚 Fast Shipping | 📦 Secure Packaging | 🤝 Customer Support
🔍 SEO KEYWORDS:
SIC AR10043 oven igniter, DS023KX oven ignitor,GE WB13K10043 replacement, GE gas range igniter,GE oven glow bar, Hotpoint oven igniter, RCA oven igniter,AP5645233, PS4704151, gas oven ignition element,gas range replacement parts, oven burner igniter,hot surface igniter, Surface Igniter DS023KX,GE Hotpoint appliance parts, oven repair replacement
Reviews
There are no reviews yet.