010010-12855-00 21 Pin Transducer Extension Cable 3ft for Garmin LiveScope GLS10
📡 21-PIN TRANSDUCER EXTENSION CABLE
Compatible with Garmin LiveScope GLS 10
3 Feet • 21-Pin Connection • Marine Sonar Accessory
⚠️ IMPORTANT PART NUMBER NOTICE
This listing is for a 3-foot compatible 21-pin extension cable .
Garmin OEM reference 010-12855-00 normally identifies a 10-foot cable. The Garmin OEM 3-foot version is identified as 010-13350-01.
Please verify the physical cable length, connector type, and product labeling before purchasing.
This listing does not represent the item as a genuine Garmin-manufactured accessory.
✨ Product Overview
Extend the reach of your compatible marine sonar installation with this 3-Foot 21-Pin Transducer Extension Cable for Garmin LiveScope GLS 10 systems .
Designed to provide additional cable length between a compatible 21-pin LiveScope transducer connection and the GLS 10 sonar module, this extension offers flexibility when positioning marine electronics aboard your boat.
The compact 3-foot length is useful for short cable extensions, equipment compartment routing, and installations requiring a little extra reach without excessive cable length.
A practical accessory for compatible LiveScope fishing electronics installations.
🌟 Product Highlights
🔌 21-Pin Connection Designed for compatible LiveScope transducer systems using a 21-pin connector. | 📏 3-Foot Extension Adds approximately 36 inches of cable length to a compatible installation. |
📡 GLS 10 Application Intended for compatible Garmin LiveScope sonar module and transducer connections. | 🚤 Flexible Installation Helps accommodate marine electronics placement and cable routing. |
📋 Technical Specifications
| Specification | Details |
|---|---|
| Product Type | Transducer Extension Cable |
| Advertised Reference | 010010-12855-00 |
| Advertised Length | 3 Feet / 36 Inches |
| Metric Length | Approx. 0.91 Meter |
| Connector Type | 21-Pin LiveScope Style |
| Compatible Brand | Garmin |
| Compatible System | LiveScope GLS 10 |
| Application | Marine Sonar Cable Extension |
| Accessory Type | Compatible Replacement / Extension |
| Quantity | 1 Cable |
📡 LiveScope Compatibility
Intended for 21-pin installations involving the following Garmin equipment:
Compatibility with the listed systems assumes matching 21-pin connections and appropriate cable specifications. Verify your exact transducer and connector before ordering.
📏 Compact 3-Foot Cable Extension
3 FT LENGTH | 21 PIN CONNECTOR |
The short extension length is convenient when the existing transducer cable needs a small amount of additional reach to connect to the sonar module.
🚤 Ideal Installation Applications
🛠️ Installation Guidelines
1. Power off the GLS 10 sonar module and connected equipment.
2. Confirm the transducer uses the correct 21-pin connector.
3. Inspect both cable ends for damage or contamination.
4. Connect the extension inline between compatible transducer wiring and the GLS 10.
5. Secure connectors according to the equipment instructions.
6. Route the cable away from sharp edges, moving parts, and pinch points.
7. Secure excess cable and verify normal sonar operation.
📦 Package Contents
✅ INCLUDED ✔ 1 x 3-Foot Transducer Extension Cable ✔ 21-Pin Connection ✔ Compatible LiveScope-Style Extension | ❌ NOT INCLUDED ✘ GLS 10 Sonar Module ✘ LiveScope Transducer ✘ Garmin Chartplotter ✘ Additional Cables or Mounting Accessories |
💙 Why Shop With OnelROR?
📦 Careful Packaging: Orders are prepared with attention to protection during shipping.
🚚 Convenient Shipping: Shipping options are available at checkout.
💬 Customer Support: Questions about your order and product details are welcome.
🛍️ More Products: Explore our store for electronics, cables, and everyday essentials.
EXTEND YOUR LIVESCOPE CONNECTION!
Add convenient reach to your compatible Garmin LiveScope GLS 10 installation with this 3-Foot 21-Pin Transducer Extension Cable .
Confirm Cable Length & Connector Compatibility
💙 Thank You for Shopping with OnelROR! 💙
Clear Product Details • Professional Listings • Customer-Focused Service
Item(s) left: 1
Descripción
📡 21-PIN TRANSDUCER EXTENSION CABLE
Compatible with Garmin LiveScope GLS 10
3 Feet • 21-Pin Connection • Marine Sonar Accessory
⚠️ IMPORTANT PART NUMBER NOTICE
This listing is for a 3-foot compatible 21-pin extension cable .
Garmin OEM reference 010-12855-00 normally identifies a 10-foot cable. The Garmin OEM 3-foot version is identified as 010-13350-01.
Please verify the physical cable length, connector type, and product labeling before purchasing.
This listing does not represent the item as a genuine Garmin-manufactured accessory.
✨ Product Overview
Extend the reach of your compatible marine sonar installation with this 3-Foot 21-Pin Transducer Extension Cable for Garmin LiveScope GLS 10 systems .
Designed to provide additional cable length between a compatible 21-pin LiveScope transducer connection and the GLS 10 sonar module, this extension offers flexibility when positioning marine electronics aboard your boat.
The compact 3-foot length is useful for short cable extensions, equipment compartment routing, and installations requiring a little extra reach without excessive cable length.
A practical accessory for compatible LiveScope fishing electronics installations.
🌟 Product Highlights
🔌 21-Pin Connection Designed for compatible LiveScope transducer systems using a 21-pin connector. | 📏 3-Foot Extension Adds approximately 36 inches of cable length to a compatible installation. |
📡 GLS 10 Application Intended for compatible Garmin LiveScope sonar module and transducer connections. | 🚤 Flexible Installation Helps accommodate marine electronics placement and cable routing. |
📋 Technical Specifications
| Specification | Details |
|---|---|
| Product Type | Transducer Extension Cable |
| Advertised Reference | 010010-12855-00 |
| Advertised Length | 3 Feet / 36 Inches |
| Metric Length | Approx. 0.91 Meter |
| Connector Type | 21-Pin LiveScope Style |
| Compatible Brand | Garmin |
| Compatible System | LiveScope GLS 10 |
| Application | Marine Sonar Cable Extension |
| Accessory Type | Compatible Replacement / Extension |
| Quantity | 1 Cable |
📡 LiveScope Compatibility
Intended for 21-pin installations involving the following Garmin equipment:
Compatibility with the listed systems assumes matching 21-pin connections and appropriate cable specifications. Verify your exact transducer and connector before ordering.
📏 Compact 3-Foot Cable Extension
3 FT LENGTH | 21 PIN CONNECTOR |
The short extension length is convenient when the existing transducer cable needs a small amount of additional reach to connect to the sonar module.
🚤 Ideal Installation Applications
🛠️ Installation Guidelines
1. Power off the GLS 10 sonar module and connected equipment.
2. Confirm the transducer uses the correct 21-pin connector.
3. Inspect both cable ends for damage or contamination.
4. Connect the extension inline between compatible transducer wiring and the GLS 10.
5. Secure connectors according to the equipment instructions.
6. Route the cable away from sharp edges, moving parts, and pinch points.
7. Secure excess cable and verify normal sonar operation.
📦 Package Contents
✅ INCLUDED ✔ 1 x 3-Foot Transducer Extension Cable ✔ 21-Pin Connection ✔ Compatible LiveScope-Style Extension | ❌ NOT INCLUDED ✘ GLS 10 Sonar Module ✘ LiveScope Transducer ✘ Garmin Chartplotter ✘ Additional Cables or Mounting Accessories |
💙 Why Shop With OnelROR?
📦 Careful Packaging: Orders are prepared with attention to protection during shipping.
🚚 Convenient Shipping: Shipping options are available at checkout.
💬 Customer Support: Questions about your order and product details are welcome.
🛍️ More Products: Explore our store for electronics, cables, and everyday essentials.
EXTEND YOUR LIVESCOPE CONNECTION!
Add convenient reach to your compatible Garmin LiveScope GLS 10 installation with this 3-Foot 21-Pin Transducer Extension Cable .
Confirm Cable Length & Connector Compatibility
💙 Thank You for Shopping with OnelROR! 💙
Clear Product Details • Professional Listings • Customer-Focused Service
Información adicional
| Peso | 0.44 lbs |
|---|---|
| Dimensiones | 7.0 × 4.0 × 1.0 in |
| Color | Black |
| Indoor/Outdoor | Outdoor |
| Material | Rubber| Plastic| Copper|Plastic |
| Item Length | 3 ft |
| Type | 010-12855-00 Transducer Extension Cable |
| Unit Type | Unit |
| Item Height | 3 in |
| Connectivity | NMEA 2000 |
| Features | Easy to Install| Durable| Waterproof|Waterproof |
| Sensors | Sonar |
| Unit Quantity | 1 |
| Sport/Activity | Fishing |
| Country of Origin | China |
| Item Condition | New |
| Brand | Unbranded |















Reviews
There are no reviews yet.